Cup-gun PEM-X1 CG

Cup-gun PEM-X1 CG

The simple handling and perfect ergonomics of WAGNER cup guns make them ideal for lab and development purposes and for powder coating individual items and very small quantities.

  • Simple plug-in principle for the cup
  • Short and safe paint change times of approximately 15 seconds
  • Funnel beaker with special geometry
  • The different slope angles ensure constant flow even with difficult powder types
  • Integrated Venturi feeding principle
  • Very fine and constantly homogeneous dosage dispensing of the powder quantity
  • The coating parameters are set via the control module
  • All coating-relevant parameters are saved and accessed via the fully electronic control module
Output voltage
100,0 kV
Air inlet pressure
0,3 MPa, 3,0 bar, 44 PSI
Operating temperature
5 – 45 °C, 41.0 – 113.0 °F
Weight
0,6 kg, 1.2 lb
Brochure
Download
Brochure
Download
Cut Sheet
Download
Operating Manual
Download